ePED® escape door terminal in switch design, 24 V DC, flush-mounted with illuminated pictogram

Product description

For use without time delay, with 4-wire bus cabling in Hi-O technology.

With emergency open module for the control and monitoring of electrical locking elements for escape routes.

For mounting in DIN switch boxes for light switch systems with manufacturer-specific covers and frames.

Consists of: illuminated pictogram; emergency open module; key switch module

With ePED® interface for locks for installation in distribution boxes

Technical data
Current consumption 24 V DC245 mA
Control functionYes, Hi-O technology
Operating and display functionYes, integrated
Power supplyExternal power supply required
Connection4-wire bus
Time delayNo
Illuminated pictogramYes
Display of down counterNo
Emergency buttonYes, latching
Control elementKey switch with Euro profile cylinder; cam position 8 x 45°; 30.5 mm long
Initial configurationWith ePED® service interface and software for MS Windows
Required power supply24 V (±15 %) DC SELV
Operating temperature range-10 °C – +55 °C
Area of applicationFor indoor use
Class of protectionIP30 (wenn vollständig montiert)
InstallationIn DIN switch boxes >= 62.5 mm deep
Dimension3 gang switch combination
Sabotage switchYes
Outputs1 x 30 V / 1 A switchover contact
Amount of bus addresses3
Key switch on opposite side to direction of escapeYes (without display)
Escape door terminal with bi-directional escape routeYes
Certified in compliance withEltVTR; DIN EN 13637:2015
Variants that can be ordered
Order number
1386-12B1--04S0Jung AS500 - alpine white; incl. 1386S00UP
1386-12B1--18S0Jung AS500 - green; incl. 1386S00UP
1386-12B6--04S0Jung LS 990 - alpine white; incl. 1386S00UP
1386-12B63535S0Jung LS 990 - stainless steel; incl. 1386S00UP
1386-12B2--04S0Gira E2 - gloss pure white; incl. 1386S00UP
1386-12B2--35S0Gira E2 – aluminum finish; incl. 1386S00UP
1386-12B3--04S0Gira standard 55 - gloss pure white; incl. 1386S00UP